-
Overview
Like its bigger brother, the ADF P100 is ultra-efficient and easy to use. However the wall mounted format gives a more cost-effective packaging and allows the use of ADF technology in applications the ADF P300 cannot access.
The ADF P100 has a nominal compensation current of 70 to 130 A RMS (three wire, 480V), 100 A RMS (four wire, 415V), and 90 A RMS (three wire, 690V). It is available in the voltage ranges 208 - 690 V RMS nominal, four wire up to 415 V RMS. The tall and narrow design allows the ADF P100 to be used in applications where space is at a premium.
The ADF P100 can be commissioned using the Web User Interface (WUI) called ADF Dashboard. No special software needs to be installed on the laptop to perform commissioning, all that is needed is a laptop with an ethernet port and an ethernet cable and a recent web browser.
The new optional HMI-3 provides a graphical interface for commissioning, operation and systems management. Standard equipment is an indicator button which can start and stop the system. The HMI-3 is a new, optional, graphical HMI with color touch screen display.
In addition to the WUI, you can interface to the standard hardware using Modbus TCP (license key is required). You can start/stop the system, read out power quality data, and change control parameters and settings via fieldbus. The flexible functionality allows integration to overlying control such as a PLC or SCADA systems. The overlying system can change control parameters, or change compensation sets on the fly. This is useful in for example marine- and generator applications. Other fieldbus interfaces (such as Profibus, Profinet) are available on request.
Comsys AB does not assume any responsibility for use of any product or method described and also reserves the right to make changes at any time without prior notice in order to improve design and supply the best possible products.
-
Features
Each ADF P100 active filter is customized to maximize performance in each application. The common features that all systems share include:
Application features
-
Dynamic VAR compensation
-
Harmonic elimination
-
Load balancing
Control features
-
Fully customizable harmonic compensation
-
Several ADF P100s can be combined for higher power
-
Insensitive to network conditions
-
Idle mode during low load (Standby)
-
Non-overloadable
-
Low response time
-
ADF Dashboard WUI (Web User Interface)
-
Floating grid frequency support
Physical features
-
Standard enclosure format system, according to IP20, EN50298, EN60529, EN50102
-
High short circuit capacity
-
Simple installation
-
Modular and scalable design
-
-
Applications
The ADF P100 is compatible with all three phase low voltage applications. It automatically eliminates harmonics and reactive displacement in a wide range of applications.
Further, the ADF P100 can be tailored to unusual applications requiring special optimizations. Some typical applications include:
-
Drive systems
-
Pump aplications
-
Offices and commercial buildings
-
Medical equipment
-
Industrial loads
-
UPS systems
-
Fans
-
-
Voltage
ADF P100
-
Model 50/480 – 480 V (208 – 480 V)
-
Model 75/480 – 480 V (208 – 480 V)
-
Model 90/480 – 480 V (208 – 480 V)
-
Model 120/480 – 480 V (208 – 480 V)
-
Model 150/480 – 480 V (208 – 480 V)
-
Model 90/690 – 690 V (480 – 690 V)
ADF P100N
-
Model 100/415 – 415 V (208 – 415 V)
-
Contact us
Need to book a consultation? Have a technical question? Just want to learn more about us? Use the contact form to send us an email.