You are here: Comsys » ADF products » ADF P200

ADF P200

The ADF P200 is one of the world's fastest active filters. It can eliminate harmonic problems up to the 100th harmonic and works well in even very resonant grids. It is also excellent at mitigating interharmonics [interharmonics are harmonics between the integer harmonics], resonances, and supraharmonics [high frequency disturbances above 2-3 kHz]. The ADF P200 is available in a wall-mounted module of similar frame as PPM300.

empty
empty
empty
  • Overview

    With the increase in renewable energy sources, such as photovoltaic plants and wind farms, the amount of supraharmonics, interharmonics and resonances increase. This makes the ADF P200 a perfect solution for the modern grid and for microgrids.

    Due to the form factor of the ADF P200, it can be integrated into an ADF P300 with 1-2 modules. It can also be used as a stand-alone wall-mounted active filter, just like the ADF P100.

    The ADF P200 can be configured using the built-in WUI (Web User Interface). No software needs to be installed on your computer to perform commissioning. All that is needed is a computer with an ethernet port and an ethernet cable.

    Comsys AB does not assume any responsibility for use of any product or method described and also reserves the right to make changes at any time without prior notice in order to improve design and supply the best possible products.

  • Features

    Each ADF P200 active filter is customized to maximize performance in each application. The common features that all systems share include:

    Application features

    • Dynamic VAR compensation  

    • Harmonic elimination  

    • Resonance elimination  

    Control features

    • Fully customizable harmonic compensation  

    • Several ADF P200 units can be combined for higher power  

    • Insensitive to network conditions  

    • Cannot be overloaded  

    • Fastest response time in the industry  

    Physical features

    • Standard enclosure format system, according to IP20, EN50298, EN60529, EN50102  

    • High short circuit capacity  

    • Simple installation  

    • Modular and scalable design  

  • Applications

    The ADF P200 is compatible with all three-phase low voltage applications. It automatically eliminates harmonics and reactive displacement in a wide range of applications. The ADF P200 can also be tailored for unusual applications requiring special optimizations. Some typical applications include:

    • Offices and commercial buildings 

    • Small and medium sized manufacturing companies 

    • Fluorescent lamps 

    • Medical equipment 

    • Industrial loads 

    • UPS systems 

    • Fans 

    • Drive systems 

  • Voltage

    ADF P200

    • Model 120/480 – 480V (208 – 480V)

Downloads

Technical specifications

EN ADF P200 Datasheet

Contact us

Need to book a consultation? Have a technical question? Just want to learn more about us? Use the contact form to send us an email.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    * Required fields